- Service
- Alarm system installation
- Area
- Long Island City, Queens, NY
- Zip code
- 11101
- Common buildings
- Apartments, co-ops and condos; Lofts and converted buildings; Near the water
- Phone
- 347-258-9165
Revolvis installs alarm systems in Long Island City (11101) for homes and businesses. New high-rise condos and rentals, converted warehouses and office towers. A typical system here is planned around the apartment, co-op or condo: contact on the unit door, contacts on fire-escape and reachable windows and phone alerts. Our licensed in-house crew designs it on a free site visit.
The buildings we alarm in Long Island City
Long Island City is a transformed waterfront district of glass condo towers, tech offices and galleries facing the Midtown skyline.
- New high-rise condos and rentals, converted warehouses and office towers.
- Open-plan lofts and tower amenities are standard.
- Many buildings have package rooms and shared amenity floors.
- Tech offices, galleries and restaurants fill the waterfront and Court Square.
- Industrial blocks remain toward the south.
What an alarm needs here
Based on those buildings, these are the setups we plan most often in Long Island City.
Apartments, co-ops and condos
In an apartment the unit door is the main risk, followed by any window on a fire escape or within reach of a roof or setback. Wireless sensors avoid drilling through plaster and keep a board or landlord comfortable. A keypad by the door and an interior siren are usually enough, and the system can move with you.
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
Lofts and converted buildings
Lofts are large open rooms with oversized windows, so the plan changes. A few long-range motion sensors replace the many small ones a divided home needs, and glass-break sensors cover the window walls. Freight doors, roof hatches and shared corridors each get their own contact.
- Long-range motion sensors for open floors
- Glass-break sensors for window walls
- Contacts on freight, corridor and roof doors
- Asset protection for equipment or artwork
Near the water
Salt air and damp shorten the life of cheap outdoor hardware, so exterior sounders and contacts are sealed, corrosion-resistant models. Basements near the water also benefit from flood sensors on the same panel, which alert you to water before it becomes damage.
- Corrosion-resistant exterior devices
- Water sensors in the basement or utility room
Offices, studios and galleries
Offices and studios are empty at night and hold equipment that is easy to carry. After-hours motion detection, a contact on the suite door and protection for server closets or equipment rooms cover most of the risk. Galleries add sensors on individual pieces.
- Contact on the suite door
- After-hours motion sensors
- Contact on server or equipment rooms
- Asset sensors for high-value items
Restaurants, bars and cafes
Restaurants close late and open early, with staff who change often. The kitchen delivery door, the office and the liquor or dry storage each get a contact, and schedules allow cleaners and early prep in without disarming the whole building.
- Contact on the kitchen or delivery door
- Contacts on office and liquor storage
- Motion sensor in the dining room after close
- Schedules for cleaners and early staff
A typical Long Island City alarm plan
Combining the building types above, a full system here usually includes:
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
- Long-range motion sensors for open floors
- Glass-break sensors for window walls
- Contacts on freight, corridor and roof doors
- Asset protection for equipment or artwork
- Corrosion-resistant exterior devices
- Water sensors in the basement or utility room
- Control panel with battery backup, keypad, siren and phone app
Build a sensor checklist
Pre-set for the most common building type in Long Island City. Adjust it to match your property.
What owners in Long Island City ask us for
- Condo entry control, package rooms and office security are the recurring themes.
- Owners want lobby and amenity coverage plus intercoms.
- Luxury condo entries and package rooms are the top coverage targets.
- Gallery and office spaces need discreet, wide-angle coverage.
Every system starts with a free site visit in Long Island City and a custom quote. How alarm installation works →
Alarm systems in Long Island City: common questions
Who installs alarm systems in Long Island City?
Revolvis installs alarm systems in Long Island City, Queens, NY 11101 with its own licensed in-house crew. We visit the property for free, design the system for the building and give a custom quote.
Can I install an alarm in a co-op or rental apartment?
Yes. Wireless sensors need no cabling through walls. Check your building rules or lease first, and we can provide the equipment details a board or landlord asks for.
How do you alarm a large open loft?
With long-range motion sensors and glass-break detection for the window walls, plus contacts on freight and roof doors, instead of a sensor in every room.
Can the alarm warn me about basement flooding?
Yes. Water sensors on the floor of a basement or utility room report to the same panel and app as the burglar alarm.
How much does an alarm system cost in Long Island City?
It depends on the number of doors and windows covered and whether sensors are wired or wireless. We quote after a free site visit, with no obligation.
Are wireless alarm sensors reliable?
Yes, when they are installed and tested properly. They suit finished homes where running cable would mean opening walls.
Will my pets set off the alarm?
Pet-tolerant motion sensors ignore animals up to a stated weight when they are placed correctly. Tell us about pets on the site visit.
