- Service
- Alarm system installation
- Area
- Greenpoint, Brooklyn, NY
- Zip code
- 11222
- Common buildings
- Vinyl-sided houses; Brownstones and rowhouses; Apartments, co-ops and condos
- Phone
- 347-258-9165
Revolvis installs alarm systems in Greenpoint (11222) for homes and businesses. Vinyl-sided rowhouses, renovated apartments and new riverfront towers. A typical system here is planned around the vinyl-sided house: interior frame-mounted contacts, siding-safe mount for any exterior sounder and phone alerts. Our licensed in-house crew designs it on a free site visit.
The buildings we alarm in Greenpoint
Greenpoint is a waterfront Brooklyn neighborhood of rowhouses, Polish bakeries and new condo towers along the East River, anchored by Franklin Avenue.
- Vinyl-sided rowhouses, renovated apartments and new riverfront towers.
- Two- and three-family homes with shared entries are common.
- New developments have amenity floors and package rooms.
- Franklin Avenue is the main retail strip; Manhattan Avenue is the older commercial spine.
- The waterfront has new retail and restaurants.
What an alarm needs here
Based on those buildings, these are the setups we plan most often in Greenpoint.
Vinyl-sided houses
Vinyl siding cracks when it is drilled carelessly, so exterior sounders and any outdoor devices are mounted on blocks through the siding into solid framing, and most sensors stay inside on the frames.
- Interior frame-mounted contacts
- Siding-safe mount for any exterior sounder
Brownstones and rowhouses
A rowhouse has more ways in than it looks: the stoop door, the garden-level door tucked under the stoop, the rear yard door and the parlor and garden windows. The garden level is below street view and is where most forced entries happen, so it gets a door contact and a motion sensor first. Recessed contacts sit inside the frame, which protects original woodwork.
- Contact on the stoop door and the garden-level door
- Contact on the rear yard door
- Contacts or glass-break coverage for garden and parlor windows
- Motion sensor in the garden-level hall
Apartments, co-ops and condos
In an apartment the unit door is the main risk, followed by any window on a fire escape or within reach of a roof or setback. Wireless sensors avoid drilling through plaster and keep a board or landlord comfortable. A keypad by the door and an interior siren are usually enough, and the system can move with you.
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
Near the water
Salt air and damp shorten the life of cheap outdoor hardware, so exterior sounders and contacts are sealed, corrosion-resistant models. Basements near the water also benefit from flood sensors on the same panel, which alert you to water before it becomes damage.
- Corrosion-resistant exterior devices
- Water sensors in the basement or utility room
Stores and storefronts
A storefront needs the front door and roll-down gate on contacts, glass-break coverage for the display windows and a contact on the back door, which is the entry thieves prefer. Opening and closing schedules and a code for each employee show who armed the system and when.
- Contacts on the front door and roll-down gate
- Glass-break sensors for display windows
- Contact on the back or delivery door
- Motion sensor covering the sales floor and stock room
- Per-employee codes with an open and close log
Restaurants, bars and cafes
Restaurants close late and open early, with staff who change often. The kitchen delivery door, the office and the liquor or dry storage each get a contact, and schedules allow cleaners and early prep in without disarming the whole building.
- Contact on the kitchen or delivery door
- Contacts on office and liquor storage
- Motion sensor in the dining room after close
- Schedules for cleaners and early staff
A typical Greenpoint alarm plan
Combining the building types above, a full system here usually includes:
- Interior frame-mounted contacts
- Siding-safe mount for any exterior sounder
- Contact on the stoop door and the garden-level door
- Contact on the rear yard door
- Contacts or glass-break coverage for garden and parlor windows
- Motion sensor in the garden-level hall
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
- Control panel with battery backup, keypad, siren and phone app
Build a sensor checklist
Pre-set for the most common building type in Greenpoint. Adjust it to match your property.
What owners in Greenpoint ask us for
- Rowhouse entry control and new development security are the steady asks.
- Owners want package-room and shared-entry coverage.
- Vinyl siding needs careful mounting without cracking the panel.
- Shared entries in two- and three-families need entry control.
Every system starts with a free site visit in Greenpoint and a custom quote. How alarm installation works →
Alarm systems in Greenpoint: common questions
Who installs alarm systems in Greenpoint?
Revolvis installs alarm systems in Greenpoint, Brooklyn, NY 11222 with its own licensed in-house crew. We visit the property for free, design the system for the building and give a custom quote.
Will installing an alarm damage vinyl siding?
It should not. Sensors are mounted inside on door and window frames, and anything outside goes on a proper mounting block.
Where does an alarm matter most in a brownstone?
At the garden level. The door under the stoop and the rear yard door are out of street view, so they get contacts and a motion sensor before anything upstairs.
Can I install an alarm in a co-op or rental apartment?
Yes. Wireless sensors need no cabling through walls. Check your building rules or lease first, and we can provide the equipment details a board or landlord asks for.
How much does an alarm system cost in Greenpoint?
It depends on the number of doors and windows covered and whether sensors are wired or wireless. We quote after a free site visit, with no obligation.
Are wireless alarm sensors reliable?
Yes, when they are installed and tested properly. They suit finished homes where running cable would mean opening walls.
Will my pets set off the alarm?
Pet-tolerant motion sensors ignore animals up to a stated weight when they are placed correctly. Tell us about pets on the site visit.
