- Service
- Alarm system installation
- Area
- Flushing, Queens, NY
- Zip code
- 11354
- Common buildings
- Apartments, co-ops and condos; Two-family and multi-family houses; Stores and storefronts
- Phone
- 347-258-9165
Revolvis installs alarm systems in Flushing (11354) for homes and businesses. Attached homes, large co-op and apartment complexes and high-traffic storefronts. A typical system here is planned around the apartment, co-op or condo: contact on the unit door, contacts on fire-escape and reachable windows and phone alerts. Our licensed in-house crew designs it on a free site visit.
The buildings we alarm in Flushing
Flushing is one of the city's busiest commercial and transit hubs, with a major Chinatown, Flushing Meadows Corona Park and dense blocks around Main Street.
- Attached homes, large co-op and apartment complexes and high-traffic storefronts.
- Many buildings are multi-family with shared lobbies.
- Brick and concrete construction is standard.
- Main Street and Roosevelt Avenue carry enormous retail traffic.
- Flushing Meadows Corona Park and Citi Field sit nearby.
What an alarm needs here
Based on those buildings, these are the setups we plan most often in Flushing.
Apartments, co-ops and condos
In an apartment the unit door is the main risk, followed by any window on a fire escape or within reach of a roof or setback. Wireless sensors avoid drilling through plaster and keep a board or landlord comfortable. A keypad by the door and an interior siren are usually enough, and the system can move with you.
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
Two-family and multi-family houses
When two or more households share a building, each unit needs to arm and disarm on its own. The system is split into partitions, one per apartment, with the shared basement, side door and hallway on a common zone the owner controls. Tenants never need each other’s codes.
- Separate partition and keypad for each unit
- Contacts on the shared front and side doors
- Contact and motion sensor for the shared basement
- Contact on any roof or bulkhead door
Stores and storefronts
A storefront needs the front door and roll-down gate on contacts, glass-break coverage for the display windows and a contact on the back door, which is the entry thieves prefer. Opening and closing schedules and a code for each employee show who armed the system and when.
- Contacts on the front door and roll-down gate
- Glass-break sensors for display windows
- Contact on the back or delivery door
- Motion sensor covering the sales floor and stock room
- Per-employee codes with an open and close log
A typical Flushing alarm plan
Combining the building types above, a full system here usually includes:
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
- Separate partition and keypad for each unit
- Contacts on the shared front and side doors
- Contact and motion sensor for the shared basement
- Contact on any roof or bulkhead door
- Contacts on the front door and roll-down gate
- Glass-break sensors for display windows
- Control panel with battery backup, keypad, siren and phone app
Build a sensor checklist
Pre-set for the most common building type in Flushing. Adjust it to match your property.
What owners in Flushing ask us for
- Storefront loss prevention and crowded-building entry control lead the asks.
- Owners want lobby and shared-area coverage plus intercoms.
- Crowded-building entries need durable cameras and entry control.
- Storefronts need coverage of both the counter and the street.
Every system starts with a free site visit in Flushing and a custom quote. How alarm installation works →
Alarm systems in Flushing: common questions
Who installs alarm systems in Flushing?
Revolvis installs alarm systems in Flushing, Queens, NY 11354 with its own licensed in-house crew. We visit the property for free, design the system for the building and give a custom quote.
Can I install an alarm in a co-op or rental apartment?
Yes. Wireless sensors need no cabling through walls. Check your building rules or lease first, and we can provide the equipment details a board or landlord asks for.
Can each apartment have its own alarm code?
Yes. The system is divided into partitions so every unit arms and disarms separately, while the owner keeps control of shared doors and the basement.
What does a storefront alarm need?
Contacts on the front door, gate and back door, glass-break sensors for the display windows, motion coverage inside and a separate code for each employee.
How much does an alarm system cost in Flushing?
It depends on the number of doors and windows covered and whether sensors are wired or wireless. We quote after a free site visit, with no obligation.
Are wireless alarm sensors reliable?
Yes, when they are installed and tested properly. They suit finished homes where running cable would mean opening walls.
Will my pets set off the alarm?
Pet-tolerant motion sensors ignore animals up to a stated weight when they are placed correctly. Tell us about pets on the site visit.
