- Service
- Alarm system installation
- Area
- Washington Heights, Manhattan, NY
- Zip code
- 10032
- Common buildings
- Apartments, co-ops and condos; Brownstones and rowhouses; Stores and storefronts
- Phone
- 347-258-9165
Revolvis installs alarm systems in Washington Heights (10032) for homes and businesses. Six-story elevator buildings and Art Deco apartments dominate, with some rowhouses. A typical system here is planned around the apartment, co-op or condo: contact on the unit door, contacts on fire-escape and reachable windows and phone alerts. Our licensed in-house crew designs it on a free site visit.
The buildings we alarm in Washington Heights
Washington Heights climbs toward the George Washington Bridge, with Art Deco apartment buildings, Fort Tryon Park and the Cloisters at its northern end.
- Six-story elevator buildings and Art Deco apartments dominate, with some rowhouses.
- Many buildings have courtyard entrances and basement-level storage rooms.
- Pre-war construction means thick masonry walls and older wiring.
- Broadway and St. Nicholas Avenue carry most of the storefronts.
- The area around 181st Street is the densest retail zone.
What an alarm needs here
Based on those buildings, these are the setups we plan most often in Washington Heights.
Apartments, co-ops and condos
In an apartment the unit door is the main risk, followed by any window on a fire escape or within reach of a roof or setback. Wireless sensors avoid drilling through plaster and keep a board or landlord comfortable. A keypad by the door and an interior siren are usually enough, and the system can move with you.
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
Brownstones and rowhouses
A rowhouse has more ways in than it looks: the stoop door, the garden-level door tucked under the stoop, the rear yard door and the parlor and garden windows. The garden level is below street view and is where most forced entries happen, so it gets a door contact and a motion sensor first. Recessed contacts sit inside the frame, which protects original woodwork.
- Contact on the stoop door and the garden-level door
- Contact on the rear yard door
- Contacts or glass-break coverage for garden and parlor windows
- Motion sensor in the garden-level hall
Stores and storefronts
A storefront needs the front door and roll-down gate on contacts, glass-break coverage for the display windows and a contact on the back door, which is the entry thieves prefer. Opening and closing schedules and a code for each employee show who armed the system and when.
- Contacts on the front door and roll-down gate
- Glass-break sensors for display windows
- Contact on the back or delivery door
- Motion sensor covering the sales floor and stock room
- Per-employee codes with an open and close log
A typical Washington Heights alarm plan
Combining the building types above, a full system here usually includes:
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
- Contact on the stoop door and the garden-level door
- Contact on the rear yard door
- Contacts or glass-break coverage for garden and parlor windows
- Motion sensor in the garden-level hall
- Contacts on the front door and roll-down gate
- Glass-break sensors for display windows
- Control panel with battery backup, keypad, siren and phone app
Build a sensor checklist
Pre-set for the most common building type in Washington Heights. Adjust it to match your property.
What owners in Washington Heights ask us for
- Walk-up entry control and package theft in lobbies are the main asks.
- Storefront coverage along Broadway is steady demand.
- Courtyard entrances and side alleys need coverage beyond the front door.
- Basement storage and laundry rooms are common blind spots in older buildings.
Every system starts with a free site visit in Washington Heights and a custom quote. How alarm installation works →
Alarm systems in Washington Heights: common questions
Who installs alarm systems in Washington Heights?
Revolvis installs alarm systems in Washington Heights, Manhattan, NY 10032 with its own licensed in-house crew. We visit the property for free, design the system for the building and give a custom quote.
Can I install an alarm in a co-op or rental apartment?
Yes. Wireless sensors need no cabling through walls. Check your building rules or lease first, and we can provide the equipment details a board or landlord asks for.
Where does an alarm matter most in a brownstone?
At the garden level. The door under the stoop and the rear yard door are out of street view, so they get contacts and a motion sensor before anything upstairs.
What does a storefront alarm need?
Contacts on the front door, gate and back door, glass-break sensors for the display windows, motion coverage inside and a separate code for each employee.
How much does an alarm system cost in Washington Heights?
It depends on the number of doors and windows covered and whether sensors are wired or wireless. We quote after a free site visit, with no obligation.
Will my pets set off the alarm?
Pet-tolerant motion sensors ignore animals up to a stated weight when they are placed correctly. Tell us about pets on the site visit.
Are wireless alarm sensors reliable?
Yes, when they are installed and tested properly. They suit finished homes where running cable would mean opening walls.
