- Service
- Alarm system installation
- Area
- Midtown, Manhattan, NY
- Zip code
- 10017
- Common buildings
- Apartments, co-ops and condos; Stores and storefronts; Restaurants, bars and cafes
- Phone
- 347-258-9165
Revolvis installs alarm systems in Midtown (10017) for homes and businesses. Office towers and hotels dominate; residential condos and co-ops sit mostly on the side streets. A typical system here is planned around the apartment, co-op or condo: contact on the unit door, contacts on fire-escape and reachable windows and phone alerts. Our licensed in-house crew designs it on a free site visit.
The buildings we alarm in Midtown
Midtown is the commercial core of the city — office towers, hotels and flagship retail around Times Square, Grand Central and Bryant Park.
- Office towers and hotels dominate; residential condos and co-ops sit mostly on the side streets.
- Commercial space makes up the bulk of the neighborhood, with ground-floor retail everywhere.
- Many buildings have multiple entrances, loading docks and freight elevators.
- Times Square, Fifth Avenue and the Garment District bring enormous foot traffic.
- Restaurants, theaters and flagship stores operate late into the night.
What an alarm needs here
Based on those buildings, these are the setups we plan most often in Midtown.
Apartments, co-ops and condos
In an apartment the unit door is the main risk, followed by any window on a fire escape or within reach of a roof or setback. Wireless sensors avoid drilling through plaster and keep a board or landlord comfortable. A keypad by the door and an interior siren are usually enough, and the system can move with you.
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
Stores and storefronts
A storefront needs the front door and roll-down gate on contacts, glass-break coverage for the display windows and a contact on the back door, which is the entry thieves prefer. Opening and closing schedules and a code for each employee show who armed the system and when.
- Contacts on the front door and roll-down gate
- Glass-break sensors for display windows
- Contact on the back or delivery door
- Motion sensor covering the sales floor and stock room
- Per-employee codes with an open and close log
Restaurants, bars and cafes
Restaurants close late and open early, with staff who change often. The kitchen delivery door, the office and the liquor or dry storage each get a contact, and schedules allow cleaners and early prep in without disarming the whole building.
- Contact on the kitchen or delivery door
- Contacts on office and liquor storage
- Motion sensor in the dining room after close
- Schedules for cleaners and early staff
A typical Midtown alarm plan
Combining the building types above, a full system here usually includes:
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
- Contacts on the front door and roll-down gate
- Glass-break sensors for display windows
- Contact on the back or delivery door
- Motion sensor covering the sales floor and stock room
- Per-employee codes with an open and close log
- Contact on the kitchen or delivery door
- Control panel with battery backup, keypad, siren and phone app
Build a sensor checklist
Pre-set for the most common building type in Midtown. Adjust it to match your property.
What owners in Midtown ask us for
- Commercial owners want loss prevention at registers and coverage of back-of-house and freight areas.
- After-hours coverage of storefronts and loading docks is the most common request.
- Loading docks and freight entrances need their own cameras, separate from the front of house.
- Retail spaces are often long and narrow, so sightlines from the door to the register matter.
Every system starts with a free site visit in Midtown and a custom quote. How alarm installation works →
Alarm systems in Midtown: common questions
Who installs alarm systems in Midtown?
Revolvis installs alarm systems in Midtown, Manhattan, NY 10017 with its own licensed in-house crew. We visit the property for free, design the system for the building and give a custom quote.
Can I install an alarm in a co-op or rental apartment?
Yes. Wireless sensors need no cabling through walls. Check your building rules or lease first, and we can provide the equipment details a board or landlord asks for.
What does a storefront alarm need?
Contacts on the front door, gate and back door, glass-break sensors for the display windows, motion coverage inside and a separate code for each employee.
Can cleaners or early staff enter without setting off the alarm?
Yes. Their codes can be limited to set hours and to certain areas, and every entry is logged.
How much does an alarm system cost in Midtown?
It depends on the number of doors and windows covered and whether sensors are wired or wireless. We quote after a free site visit, with no obligation.
How long does installation take?
Most homes and small businesses are completed in one day, including testing and a walkthrough of the app.
What happens if the internet or power goes out?
The panel runs on battery backup, the siren and sensors keep working, and a cellular link can keep alerts reaching your phone.
