5-10 INSTALLS WEEKLY • NYC 5 BOROUGHS • ALL OF LONG ISLAND • NJ
FAQ • CAMERAS

CAMERA TROUBLESHOOTING

Straight answers from the crew that installs these systems.

5 answers about camera troubleshooting, from the Revolvis crew that installs these systems across NYC, Long Island and northern New Jersey.

Questions and answers

Why did one camera go offline?

Common causes are a loose or damaged cable, a failed connector, a switch port problem or a power issue. Swapping the camera to a known-good port narrows it down.

Why is my camera picture blurry?

A dirty lens, moisture inside the housing, a lens out of focus or a bitrate set too low. Clean it first, then check settings.

Why is the timestamp wrong?

The recorder clock has drifted or the time zone is wrong. Set it to sync automatically so evidence carries the correct time.

Why can I not see cameras away from home?

The property’s internet may be down, the recorder may have lost its connection, or the app login may have expired.

When should I repair instead of replace?

If the cameras are modern and the fault is a cable, connector, drive or setting, repair. If the system is old, low resolution or unsupported, replacement usually makes more sense.

Have a question about your own property? Call 347-258-9165 or request a free on-site quote. Related service: Security camera installation.

More cameras questions

Camera placement at the front doorDriveway and garage camerasBackyard and side gate camerasCorners, angles and blind spotsMounting heightIndoor camerasWired vs. wireless camerasHidden wiring and cablingPoE and network setupRecorders: NVR and DVRStorage and retentionResolution and lensesNight vision and lightingMotion detection and alertsRemote viewing and appsLicense plate captureWeather and outdoor durabilityAudio recordingMaintenance and cleaningAll FAQ topics →
CALL 347-258-9165 — NOWCustom quote after visit SCHEDULE A QUOTE →No obligation • Licensed NYC + LI