Security camera installation in the Bronx typically costs between $1,400 and $4,200 for a house with four to six cameras in 2026, between $900 and $3,000 for a small apartment or unit, and between $2,500 and $9,000 for a bodega, restaurant or small business. The borough has everything from detached houses in Riverdale and Throggs Neck to pre-war apartment buildings along the Grand Concourse and large warehouses in Hunts Point and Port Morris, so costs and layouts vary widely.
This guide explains what drives costs in the Bronx, how different building types change the plan and what to ask before you hire. Figures are planning ranges, not quotes.
1. Planning Ranges by Property Type
| Property | Typical cameras | Typical installed range |
|---|---|---|
| Detached or semi-detached house (Riverdale, Throgs Neck, Pelham Bay, Country Club) | 4 to 6 | $1,800 to $4,500 |
| Row house or attached two-family | 3 to 5 | $1,500 to $3,800 |
| Pre-war apartment building (exterior and entrance) | 4 to 10 | $3,000 to $9,000 |
| Apartment unit (renter or co-op owner) | 1 to 2 | $600 to $1,800 |
| Bodega, deli or small shop | 4 to 8 | $2,500 to $7,500 |
| Restaurant | 8 to 14 | $5,000 to $12,000 |
| Warehouse or industrial (Hunts Point, Port Morris, Bruckner area) | 8 to 20 | $6,000 to $22,000 |
2. What Makes the Bronx Different
Pre-war masonry. Many apartment buildings and row houses have thick masonry walls and old plaster. Drilling and cable routing take more time, and routes often run through basements, roofs or stair halls.
Multi-unit buildings. Common areas are controlled by the owner, management or board. Cameras in lobbies, hallways and entrances need approval. Inside a private unit, tenants and owners have more freedom, subject to lease terms.
Commercial corridors. The Grand Concourse, Fordham Road, Jerome Avenue, Southern Boulevard, White Plains Road and Tremont Avenue are lined with shops and restaurants that depend on foot traffic. These businesses often need cameras covering the sidewalk approach, the interior floor and the register.
Large industrial areas. Hunts Point, Port Morris and the Bruckner Boulevard corridor host warehouses, distribution centers and food businesses. These sites need larger camera counts, long cable runs, strong night performance and lots of storage.
Hillside and waterfront homes. Riverdale and Spuyten Duyvil have steep lots and wooded properties. Throggs Neck and City Island have waterfront exposure. Cabling and equipment ratings should account for slopes, trees and weather.
3. Typical Layouts
A Bronx row house or two-family: 1. Front door and stoop. 2. Driveway or side passage, if present. 3. Rear door and yard. 4. Basement entrance.
A small apartment building: 1. Front entrance and vestibule. 2. Lobby overview. 3. Side or service entrance. 4. Rear yard or fire escape access. 5. Basement door. 6. Roof door, if applicable.
A bodega or deli: 1. Entrance at face height. 2. Register and counter. 3. Aisle overview. 4. Stockroom or back area. 5. Rear door or alley. 6. Exterior sidewalk view.
4. Business Coverage and the NYPD Program
Bronx shops and restaurants that handle cash or valuable inventory benefit from cameras that clearly capture faces at the door and activity at the register. Longer retention, such as 30 days, helps when you discover an issue days later.
The NYPD's free Community Camera Sharing Program lets any business with a security camera register its location so police can view a live feed during a crime or emergency there. A well-aimed, reliable system makes this program far more useful.
Earlier city efforts show how police use business footage. In May 2024, the NYPD and the mayor's office announced a voluntary pilot in which businesses could connect existing cameras to precinct detectives, starting with the 125th Street area in Harlem and Flushing, according to ABC7 New York. It was a pilot, so check current availability.
5. Crime Context, Honestly
Crime news from the Bronx can be alarming, and some incidents involve violence that no camera can prevent. We do not use those events to sell systems. The more useful context is the trend: the NYPD reported citywide burglary down 19.5% and retail theft down 15% in May 2026 compared with May 2025 (NYPD). Property crime still happens, and when it does, clear video helps police and insurers. Check the NYPD precinct pages for the latest figures where you live.
6. Neighborhood Notes
Riverdale, Spuyten Duyvil, Fieldston. Detached houses, co-ops and wooded lots. Long approaches, hillside cable runs and gates are common.
Throggs Neck, Pelham Bay, City Island, Country Club. Detached and semi-detached homes, driveways, waterfront weather and flood considerations.
Fordham, Belmont, Tremont, University Heights. Dense apartment buildings and active commercial strips. Building rules and masonry construction matter.
Mott Haven, Melrose, Hunts Point, Port Morris. Mixed residential and industrial. Larger systems, night performance and longer retention are typical for warehouses and yards.
Parkchester, Soundview, Castle Hill. Large apartment complexes and row houses. Many installs involve entrances and shared spaces.
7. Saving Money
- Cover entrances first. Add interior cameras later.
- In a multi-unit building, talk with owners or neighbors about shared costs.
- Choose a recorder with spare channels.
- Use motion recording on quiet cameras to stretch storage.
- Keep cable runs short by choosing a central recorder location in a protected area.
Not sure what your Bronx building needs? Revolvis will walk the property with you and mark the spots.
8. Questions to Ask Before Hiring
- How will you handle masonry drilling and sealing?
- Who approves cameras in common areas?
- How will you protect the recorder from tampering, power loss and water?
- How many days of footage will be stored?
- Can you register my cameras with the NYPD program if I want to?
- What is the warranty and who services it?
See local details on our pages for security camera installation in the Bronx, Riverdale, Throggs Neck and Fordham.
9. Working in Occupied Buildings: Access, Notice and Scheduling
Many Bronx installations happen in buildings where people live and work while the job is under way. Planning for that makes the project smoother for everyone.
Notice. If the installation involves common areas or access to apartments, tell residents in advance. A short written notice with the date, time and purpose avoids surprises.
Access. Roof doors, basements and utility rooms are often locked. Arrange for the super or owner to be available, or leave keys with someone responsible.
Protection. Hallways and lobbies should be protected from dust, and the crew should clean up daily.
Hours. Many buildings limit noisy work to weekday daytime hours. Confirm the rules before scheduling.
Insurance. Building owners and managers may ask for a certificate of insurance before work begins. Request what you need early so it does not delay the start.
10. Keeping the Recorder Safe in a Shared Building
In multi-unit buildings, the recorder is both the brain and the weak point of the system. Put it in a locked room or cabinet that residents cannot reach, away from water pipes, boilers and heavy foot traffic. Make sure the location has a reliable outlet, ventilation and a network connection. Limit who has the password, and change it when management or staff changes. A recorder that anyone can unplug or delete from is not worth much when you need it.
If a lobby or entrance camera records people who live in the building, treat the footage with care. Share it with police when asked, and avoid casual viewing or sharing among neighbors.
11. Planning a Phased Installation
Not every Bronx owner can fund a complete system at once, and phasing is a legitimate way to start. The key is to design the whole system first and then build it in stages, so nothing has to be torn out later. Phase one covers the main entrance, the rear door and the recorder. Phase two adds side entrances, the roof door and interior corridors. Phase three adds extras such as license-plate capture, additional lighting or integration with access control.
For this to work, the first-phase equipment needs spare capacity: a recorder with extra channels, a switch with open ports and cable pulled to future camera positions where practical. Ask your installer to write the full plan and price each phase separately, so you can budget and so any later work can be done by the same crew without surprises.
More From Revolvis
Cameras are one layer of a secure property. The same in-house crew also handles the rest:
- Keyless entry installation and smart lock installation
- Access control systems and commercial access control
- Video doorbells and intercoms
- Alarm system installation
- Complete unified security
Learn more about Revolvis, meet the team, see all services, browse the blog or contact us.
Areas We Serve
Revolvis installs residential and commercial camera systems across the New York metro area. Every borough and county has its own building stock, rules and wiring challenges, so the plan for a Queens two-family is not the plan for a Manhattan co-op.
- Staten Island: houses, detached garages and shop fronts. See security camera installation in Staten Island.
- Brooklyn: brownstones, row houses and storefronts. See security camera installation in Brooklyn.
- Queens: attached brick homes, two-families and busy commercial strips. See security camera installation in Queens.
- The Bronx: pre-war buildings, bodegas and warehouses. See security camera installation in the Bronx.
- Manhattan: co-ops, condos, offices and retail. See security camera installation in Manhattan.
- Long Island: Nassau County and Suffolk County.
- New Jersey: Jersey City, Newark, Hoboken and nearby towns.
The full list is on the service areas page.
Get a Custom Quote After a Site Visit
Revolvis prices every job after a site visit, because the building sets the cost as much as the equipment does. A few things make the estimate faster and more accurate:
- The address and property type: house, apartment, co-op, condo, storefront or warehouse.
- Which doors, sides and areas you want covered, and what worries you most.
- Photos of those spots and any spots where you already have cabling or power.
- How many days of footage you want to keep and whether you want to watch on your phone.
- Any landlord, board, lender or insurer requirement.
Call 347-258-9165 or use the contact page to book a site visit. The quote you receive is written and itemized, so you can compare it line by line.
Frequently Asked Questions
How much does security camera installation cost in the Bronx? Houses commonly run $1,400 to $4,500. Small businesses commonly run $2,500 to $9,000 and warehouses $6,000 or more.
Do I need landlord permission for cameras in a Bronx apartment? For anything outside your unit or on shared walls and hallways, yes. Check your lease and get approval in writing.
Where should a Bronx bodega put cameras? At the door at face height, over the register, in the stock area and at the rear door, with an outside view of the sidewalk.
Can I join the NYPD camera program? Businesses in NYC with a security camera can register at the city's program page. Availability can change, so confirm on the official page.
Is the Bronx harder to wire than other boroughs? Pre-war masonry buildings can be harder. Detached houses are often simpler.
How long does installation take? A house usually takes a day. Larger buildings and warehouses take longer.
Ready for a custom quote? Call Revolvis at 347-258-9165 for a site visit and a written, itemized estimate.
Safety note: A camera system supports, but does not replace, good locks, lighting, alarms and everyday habits. If you are in danger or witnessing a crime, call 911. Prices and legal summaries in this guide are general information for the New York metro area, not an offer or legal advice. A written quote after a site visit governs your actual price, and for legal questions you should confirm with the agencies linked in the article or a licensed attorney.