- Service
- Alarm system installation
- Area
- Newark, NJ
- Zip code
- 07102
- Common buildings
- Brownstones and rowhouses; Apartments, co-ops and condos; Two-family and multi-family houses
- Phone
- 347-258-9165
Revolvis installs alarm systems in Newark (07102) for homes and businesses. Rowhouses, low-rise apartment buildings and some newer towers. A typical system here is planned around the brownstone or rowhouse: contact on the stoop door and the garden-level door, contact on the rear yard door and phone alerts. Our licensed in-house crew designs it on a free site visit.
The buildings we alarm in Newark
Newark is New Jersey's largest city, a transit and commercial hub with rowhouses, apartments and a busy downtown.
- Rowhouses, low-rise apartment buildings and some newer towers.
- Many buildings are multi-family with shared entries.
- Brick construction dominates.
- Downtown Newark, the Ironbound and Broad Street carry the retail.
- Offices, restaurants and transit hubs drive traffic.
What an alarm needs here
Based on those buildings, these are the setups we plan most often in Newark.
Brownstones and rowhouses
A rowhouse has more ways in than it looks: the stoop door, the garden-level door tucked under the stoop, the rear yard door and the parlor and garden windows. The garden level is below street view and is where most forced entries happen, so it gets a door contact and a motion sensor first. Recessed contacts sit inside the frame, which protects original woodwork.
- Contact on the stoop door and the garden-level door
- Contact on the rear yard door
- Contacts or glass-break coverage for garden and parlor windows
- Motion sensor in the garden-level hall
Apartments, co-ops and condos
In an apartment the unit door is the main risk, followed by any window on a fire escape or within reach of a roof or setback. Wireless sensors avoid drilling through plaster and keep a board or landlord comfortable. A keypad by the door and an interior siren are usually enough, and the system can move with you.
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
Two-family and multi-family houses
When two or more households share a building, each unit needs to arm and disarm on its own. The system is split into partitions, one per apartment, with the shared basement, side door and hallway on a common zone the owner controls. Tenants never need each other’s codes.
- Separate partition and keypad for each unit
- Contacts on the shared front and side doors
- Contact and motion sensor for the shared basement
- Contact on any roof or bulkhead door
Stores and storefronts
A storefront needs the front door and roll-down gate on contacts, glass-break coverage for the display windows and a contact on the back door, which is the entry thieves prefer. Opening and closing schedules and a code for each employee show who armed the system and when.
- Contacts on the front door and roll-down gate
- Glass-break sensors for display windows
- Contact on the back or delivery door
- Motion sensor covering the sales floor and stock room
- Per-employee codes with an open and close log
Offices, studios and galleries
Offices and studios are empty at night and hold equipment that is easy to carry. After-hours motion detection, a contact on the suite door and protection for server closets or equipment rooms cover most of the risk. Galleries add sensors on individual pieces.
- Contact on the suite door
- After-hours motion sensors
- Contact on server or equipment rooms
- Asset sensors for high-value items
A typical Newark alarm plan
Combining the building types above, a full system here usually includes:
- Contact on the stoop door and the garden-level door
- Contact on the rear yard door
- Contacts or glass-break coverage for garden and parlor windows
- Motion sensor in the garden-level hall
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
- Separate partition and keypad for each unit
- Contacts on the shared front and side doors
- Control panel with battery backup, keypad, siren and phone app
Build a sensor checklist
Pre-set for the most common building type in Newark. Adjust it to match your property.
What owners in Newark ask us for
- Multi-family entries and commercial storefronts lead the asks.
- Owners want shared-area and perimeter coverage.
- Multi-family entries and lobbies need entry control.
- Rowhouses need stoop and rear-yard coverage.
Every system starts with a free site visit in Newark and a custom quote. How alarm installation works →
Alarm systems in Newark: common questions
Who installs alarm systems in Newark?
Revolvis installs alarm systems in Newark, NJ 07102 with its own licensed in-house crew. We visit the property for free, design the system for the building and give a custom quote.
Where does an alarm matter most in a brownstone?
At the garden level. The door under the stoop and the rear yard door are out of street view, so they get contacts and a motion sensor before anything upstairs.
Can I install an alarm in a co-op or rental apartment?
Yes. Wireless sensors need no cabling through walls. Check your building rules or lease first, and we can provide the equipment details a board or landlord asks for.
Can each apartment have its own alarm code?
Yes. The system is divided into partitions so every unit arms and disarms separately, while the owner keeps control of shared doors and the basement.
How much does an alarm system cost in Newark?
It depends on the number of doors and windows covered and whether sensors are wired or wireless. We quote after a free site visit, with no obligation.
Can the alarm work with security cameras?
Yes. An alarm event can trigger recording and send a video clip to your phone, so you see what set it off.
Can I arm and disarm from my phone?
Yes. The app lets you arm, disarm and see which sensor triggered, from anywhere.
