- Service
- Alarm system installation
- Area
- Hempstead, Nassau County, NY
- Zip code
- 11550
- Common buildings
- Detached single-family houses; Two-family and multi-family houses; Apartments, co-ops and condos
- Phone
- 347-258-9165
Revolvis installs alarm systems in Hempstead (11550) for homes and businesses. Detached single-family homes, two-family houses and apartment complexes. A typical system here is planned around the single-family house: contacts on front, back and side doors, contact on the garage-to-house door and phone alerts. Our licensed in-house crew designs it on a free site visit.
The buildings we alarm in Hempstead
Hempstead is a dense Long Island hub of single-family homes, apartments and a busy commercial center around the village.
- Detached single-family homes, two-family houses and apartment complexes.
- Many homes have driveways and garages.
- A mix of brick, siding and stucco construction.
- Hempstead Turnpike and the village center carry the retail.
- Stores, offices and restaurants cluster downtown.
What an alarm needs here
Based on those buildings, these are the setups we plan most often in Hempstead.
Detached single-family houses
A detached house can be approached from every side, so the perimeter comes first: front, back and side doors, the door from the garage into the house, sliding doors and basement entries. Ground-floor windows hidden from the street come next. Stay mode arms that perimeter at night while you move around inside.
- Contacts on front, back and side doors
- Contact on the garage-to-house door
- Contacts on sliding doors and basement entries
- Contacts or glass-break coverage for rear ground-floor windows
- Motion sensors in the main hall and family room
Two-family and multi-family houses
When two or more households share a building, each unit needs to arm and disarm on its own. The system is split into partitions, one per apartment, with the shared basement, side door and hallway on a common zone the owner controls. Tenants never need each other’s codes.
- Separate partition and keypad for each unit
- Contacts on the shared front and side doors
- Contact and motion sensor for the shared basement
- Contact on any roof or bulkhead door
Apartments, co-ops and condos
In an apartment the unit door is the main risk, followed by any window on a fire escape or within reach of a roof or setback. Wireless sensors avoid drilling through plaster and keep a board or landlord comfortable. A keypad by the door and an interior siren are usually enough, and the system can move with you.
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
Stores and storefronts
A storefront needs the front door and roll-down gate on contacts, glass-break coverage for the display windows and a contact on the back door, which is the entry thieves prefer. Opening and closing schedules and a code for each employee show who armed the system and when.
- Contacts on the front door and roll-down gate
- Glass-break sensors for display windows
- Contact on the back or delivery door
- Motion sensor covering the sales floor and stock room
- Per-employee codes with an open and close log
Offices, studios and galleries
Offices and studios are empty at night and hold equipment that is easy to carry. After-hours motion detection, a contact on the suite door and protection for server closets or equipment rooms cover most of the risk. Galleries add sensors on individual pieces.
- Contact on the suite door
- After-hours motion sensors
- Contact on server or equipment rooms
- Asset sensors for high-value items
A typical Hempstead alarm plan
Combining the building types above, a full system here usually includes:
- Contacts on front, back and side doors
- Contact on the garage-to-house door
- Contacts on sliding doors and basement entries
- Contacts or glass-break coverage for rear ground-floor windows
- Motion sensors in the main hall and family room
- Separate partition and keypad for each unit
- Contacts on the shared front and side doors
- Contact and motion sensor for the shared basement
- Contact on any roof or bulkhead door
- Contact on the unit door
- Control panel with battery backup, keypad, siren and phone app
Build a sensor checklist
Pre-set for the most common building type in Hempstead. Adjust it to match your property.
What owners in Hempstead ask us for
- Driveway coverage, two-family entries and downtown storefronts lead the asks.
- Owners want perimeter and front-door visibility.
- Driveways and garages are the top coverage targets.
- Two-family homes need shared-entry and hallway coverage.
Every system starts with a free site visit in Hempstead and a custom quote. How alarm installation works →
Alarm systems in Hempstead: common questions
Who installs alarm systems in Hempstead?
Revolvis installs alarm systems in Hempstead, Nassau County, NY 11550 with its own licensed in-house crew. We visit the property for free, design the system for the building and give a custom quote.
What should an alarm cover first in a detached house?
Every exterior door, including the door from the garage into the house and any basement entry, then the ground-floor windows that cannot be seen from the street.
Can each apartment have its own alarm code?
Yes. The system is divided into partitions so every unit arms and disarms separately, while the owner keeps control of shared doors and the basement.
Can I install an alarm in a co-op or rental apartment?
Yes. Wireless sensors need no cabling through walls. Check your building rules or lease first, and we can provide the equipment details a board or landlord asks for.
How much does an alarm system cost in Hempstead?
It depends on the number of doors and windows covered and whether sensors are wired or wireless. We quote after a free site visit, with no obligation.
Will my pets set off the alarm?
Pet-tolerant motion sensors ignore animals up to a stated weight when they are placed correctly. Tell us about pets on the site visit.
Are wireless alarm sensors reliable?
Yes, when they are installed and tested properly. They suit finished homes where running cable would mean opening walls.
