- Service
- Alarm system installation
- Area
- Bensonhurst, Brooklyn, NY
- Zip code
- 11214
- Common buildings
- Two-family and multi-family houses; Apartments, co-ops and condos; Garages and driveways
- Phone
- 347-258-9165
Revolvis installs alarm systems in Bensonhurst (11214) for homes and businesses. Attached brick one- and two-family homes, small apartments and storefronts. A typical system here is planned around the two-family or multi-family house: separate partition and keypad for each unit, contacts on the shared front and side doors and phone alerts. Our licensed in-house crew designs it on a free site visit.
The buildings we alarm in Bensonhurst
Bensonhurst is a dense South Brooklyn neighborhood of brick attached homes and busy shopping corridors centered on 86th Street and 18th Avenue.
- Attached brick one- and two-family homes, small apartments and storefronts.
- Many homes have driveways and attached garages.
- Brick facades are standard, which affects mounting hardware.
- 86th Street and 18th Avenue are the main retail strips.
- Bodegas, bakeries and services line the avenues.
What an alarm needs here
Based on those buildings, these are the setups we plan most often in Bensonhurst.
Two-family and multi-family houses
When two or more households share a building, each unit needs to arm and disarm on its own. The system is split into partitions, one per apartment, with the shared basement, side door and hallway on a common zone the owner controls. Tenants never need each other’s codes.
- Separate partition and keypad for each unit
- Contacts on the shared front and side doors
- Contact and motion sensor for the shared basement
- Contact on any roof or bulkhead door
Apartments, co-ops and condos
In an apartment the unit door is the main risk, followed by any window on a fire escape or within reach of a roof or setback. Wireless sensors avoid drilling through plaster and keep a board or landlord comfortable. A keypad by the door and an interior siren are usually enough, and the system can move with you.
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
Garages and driveways
The garage is a common way in because the overhead door is often left open and the door into the house is rarely locked. A tilt sensor reports whether the overhead door is open, and a contact on the interior door closes the gap.
- Tilt sensor on the overhead garage door
- Contact on the garage-to-house door
Stores and storefronts
A storefront needs the front door and roll-down gate on contacts, glass-break coverage for the display windows and a contact on the back door, which is the entry thieves prefer. Opening and closing schedules and a code for each employee show who armed the system and when.
- Contacts on the front door and roll-down gate
- Glass-break sensors for display windows
- Contact on the back or delivery door
- Motion sensor covering the sales floor and stock room
- Per-employee codes with an open and close log
Restaurants, bars and cafes
Restaurants close late and open early, with staff who change often. The kitchen delivery door, the office and the liquor or dry storage each get a contact, and schedules allow cleaners and early prep in without disarming the whole building.
- Contact on the kitchen or delivery door
- Contacts on office and liquor storage
- Motion sensor in the dining room after close
- Schedules for cleaners and early staff
A typical Bensonhurst alarm plan
Combining the building types above, a full system here usually includes:
- Separate partition and keypad for each unit
- Contacts on the shared front and side doors
- Contact and motion sensor for the shared basement
- Contact on any roof or bulkhead door
- Contact on the unit door
- Contacts on fire-escape and reachable windows
- One motion sensor covering the entry hall
- Keypad at the door and an interior siren
- Tilt sensor on the overhead garage door
- Contact on the garage-to-house door
- Control panel with battery backup, keypad, siren and phone app
Build a sensor checklist
Pre-set for the most common building type in Bensonhurst. Adjust it to match your property.
What owners in Bensonhurst ask us for
- Driveways, garages and storefront coverage lead the asks.
- Owners want front-door and rear-yard visibility plus alarm coverage.
- Attached garages and driveways need coverage of both car and home.
- Brick drilling requires masonry bits and weatherproof anchors.
Every system starts with a free site visit in Bensonhurst and a custom quote. How alarm installation works →
Alarm systems in Bensonhurst: common questions
Who installs alarm systems in Bensonhurst?
Revolvis installs alarm systems in Bensonhurst, Brooklyn, NY 11214 with its own licensed in-house crew. We visit the property for free, design the system for the building and give a custom quote.
Can each apartment have its own alarm code?
Yes. The system is divided into partitions so every unit arms and disarms separately, while the owner keeps control of shared doors and the basement.
Can I install an alarm in a co-op or rental apartment?
Yes. Wireless sensors need no cabling through walls. Check your building rules or lease first, and we can provide the equipment details a board or landlord asks for.
Can the alarm tell me if I left the garage door open?
Yes. A tilt sensor on the overhead door reports open or closed to the app and can alert you at a set time each night.
How much does an alarm system cost in Bensonhurst?
It depends on the number of doors and windows covered and whether sensors are wired or wireless. We quote after a free site visit, with no obligation.
How long does installation take?
Most homes and small businesses are completed in one day, including testing and a walkthrough of the app.
What happens if the internet or power goes out?
The panel runs on battery backup, the siren and sensors keep working, and a cellular link can keep alerts reaching your phone.
